Foggy Window & Double Pane Glass Repair in Fairfax, VA
If there’s a haze, streaks or water droplets between the two panes of your window, the seal of the insulated glass unit has failed. You can’t wipe it away, and it won’t clear up on its own. The fix is to replace the sealed glass unit, not the whole window. First Window Glass Repair does this for homeowners throughout Fairfax and Northern Virginia.
Request a quote · Call (703) 928-2631
Inside, outside or in between? Check first
| Where is the moisture? | What it means | Fix |
|---|---|---|
| On the inside surface (room side) | High indoor humidity, common in winter | Ventilation or a dehumidifier. No glass repair needed |
| On the outside surface | Normal morning dew on efficient glass | Nothing. It’s a sign the glass insulates well |
| Between the panes | Seal failure. The insulating gas has leaked out and moist air has got in | Replace the insulated glass unit |
Why double-pane windows fog
A double-pane window is two sheets of glass sealed around the edge with a spacer, often filled with argon gas. Over the years, heat, sun and the daily expansion and contraction of the glass wear down that seal. Once it fails, humid air gets in and condenses between the panes, and the window loses much of its insulating value. Windows that get strong afternoon sun usually fail first.
Affordable repairs with lasting quality
No hidden fees or unexpected charges
Why replace the glass unit, not the window
- Lower cost: you pay for the glass unit and labor, not a new frame, trim and interior finishing.
- Faster: no wall or trim work, about 30 to 60 minutes per window once the unit is made.
- Same look: your existing frames, grids and hardware stay.
- Better glass: the new unit can be upgraded to Low-E and argon fill, even if the original wasn’t.
A new window makes more sense if the frame is rotted, the sash is warped or several windows are failing at once on a very old house. We’ll tell you if that’s the case.
Trusted local window glass repair experts
Transparent pricing with no hidden fees
Can foggy windows be “defogged”?
Some companies drill the glass and dry it out. That can clear the haze for a while, but it doesn’t restore the seal or the insulating gas, so the window still loses heat. We recommend a new sealed unit.
The process
- Inspection and measurement of each fogged unit: size, thickness, spacer, grids and glass type.
- Written quote. Grouping several windows into one order lowers the cost per window.
- New units are made to order. We confirm the timing with your quote.
- Installation: the old unit comes out, the new unit is set and sealed, and the glazing beads go back on.
What affects the cost
- The size of each unit (small sash, standard double-hung, large picture window or patio door panel)
- Glass options such as Low-E coating, argon fill, tempered glass or internal grids
- How many windows are done together
- Access, for example upstairs windows
For foggy sliding doors, see patio door glass replacement. For a cracked double-pane unit the repair is the same. See window glass repair.
Frequently Asked Questions
Below is a listing of the most frequently asked questions we encounter. If your question isn’t listed, give us a call. No question is too silly or too hard. Try us
Can you fix fog between window panes without replacing the window?
Yes. We replace only the sealed insulated glass unit inside your existing frame. The frame, trim and hardware stay.
Is a foggy window an energy problem?
Yes. A failed seal means the insulating gas has escaped, so that window lets more heat and cold through than it was designed to.
Will the new glass match my other windows?
We match the thickness, tint and grid pattern, so the new unit looks like the rest of your windows from inside and out.
Get rid of foggy windows
Text a photo of the fogged window to (703) 928-2631 or request a quote. We’ll confirm whether glass-unit replacement will work and give you a price.